Michigan Construction Code Commission Rejects Imported Cast Iron Materials
LANSING, MICH. – The Michigan Construction Code Commission in mid-September unanimously approved the August 22, 2007, recommendation of the Michigan Plumbing Board to deny approval of imported cast iron soil pipe and fittings from MWI Import Products for use on state construction projects in the State of Michigan.
MWI Import Product’s request for official approval was denied after MWI was unable to provide proof that their products conformed to applicable standards referenced in the Michigan Plumbing Code and failed to comply with an earlier resolution of the Plumbing Board, according to a written report submitted by Michigan Chief Plumbing Inspector Bob Konyndyk. An official record of the proceeding will be available on the Michigan Construction Code Commission web site at www.michigan.gov/cis.
The Cast Iron Soil Pipe Institute (www.cispi.org) is dedicated to aiding the plumbing industry and addressing important technical aspects relating to the manufacture and installation of cast iron soil pipe and fittings and their use in the marketplace. Through the preparation and distribution of technical data, work with local and national code bodies, and by calling on code officials and plumbing engineers, CISPI helps create a better understanding of the merits of specifying and installing cast iron soil pipe and fittings.
CISPI maintains a quality control program for its member foundries. Each plant location is audited three times a year to ensure that cast iron soil pipe and fittings bearing the Institute’s collective trademark meet the appropriate CISPI and ASTM standards. NSF International has accredited CISPI’s quality control program to validate the compliance of member products with those standards.
Want to use this article? Click here for options!
© 2008 Penton Media Inc.
advertisement
This Month's Products
THIS AUTOMATED BACK-UP POWER SOURCE
couples with any HVAC unit or boiler to provide a continual supply of power so long as fuel supply (natural gas, propane or oil) is uninterrupted.
Everlite Hybrid Industries
THE N-0751M-DVC CONCENTRIC VENTING HEATER
is an indoor-only tankless unit that delivers up to 9.8 GPM of hot water. It is easy to install with zero venting clearance. It uses the same heat exchanger found in the company's high-end commercial units.
THE GT SERIES OF HORIZONTAL SPLIT-CASE PUMPS
includes six models with flow capacities between 5,800 to 17,500 GPM with heads up to 360'. The pumps have a standard operating pressure of 175 psig and can handle fluid temperatures up to 250°F (120°C).
THIS HOSE BIBB LOCK
is designed to protect any standard ¾" outdoor faucet or hose spigot. As drought conditions have plagued dozens of states, water theft has become considerably more common.
Contractor Opinion Poll
Industry Resources
advertisement












